Aeroseal

Aeroseal is a patented breakthrough technology that tackles duct leaks from the inside out. The Aeroseal process puts escaping air under pressure and causes polymer particles to stick first to the edges of a leak, then to each other until the leak is completely sealed.

Here’s how it works:

1. Prepare Your System

Plugging your registers with foam forces the air in your duct work to escape through leaks. By forcing air to escape through leaks we are able to pretest your duct system and begin the duct sealing process.

 

 

2. Pretest Your Ductwork

Once the system is properly prepped the Aeroseal machine is connected to the duct work using lay flat tubing.

The Air Duct Diagnostic pretest will detect the exact amount of duct leakage in the duct system – the typical duct leakage detected in a home is between 30-40%.

Next, the non-toxic, UL tested and approved, aerosol sealant is injected into your duct system. As the sealant exits your ductwork through leaks it begins to collect on the edge of the hole until the leak is completely sealed. Aeroseal can seal leaks up to 5/8ths of an inch.

3. Seal Your Ductwork

Small aerosol particles are injected and kept suspended in the airflow by continuous air movement.

The aerosol particles begin collecting on the edges of holes and cracks in your duct work and seal your leaky duct work from the inside.  This entire process is computer controlled where you can monitor the results in real time showing you just how effective the Aeroseal process is. Ducts are sealed with only 1 to 2 oz. of sealant material.

4. Review Your Results

A computer generated analysis summarizes your home’s duct leakage reduction providing you with verification of the success of the Aeroseal application.

Once the process is complete your certified Aeroseal technician will provide you with a printed certificate summarizing your results.

Enjoy Improved Home Comfort & Indoor Air Quality!

Now that you’ve had your ductwork sealed with Aeroseal you can expect to experience increased home comfort, improved indoor air quality, and lower energy bills!

Turn Cycle Solutions is proud to provide energy efficiency and general contracting services for both commercial and residential clients throughout the state of New Hampshire.